BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS316

  • Size8.5x17"
  • PCD5x114.3
  • OffsetET39
  • Centre bore67 mm
  • Lip0.5"
  • Barrel7.5"

This page covers the BBS RS316, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 17-inch wheel, 8.5 inches wide and is listed for Mitsubishi GTO.

The 5x114.3 bolt pattern of the BBS RS316 is the one used by many Japanese and Korean cars; the 67 mm centre bore decides whether you need hub-centric rings.

ET39 is a high offset for the BBS RS316, so it tucks well inside the arch, as front-drive and most modern cars need. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.

At 17 inches, the BBS RS316 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS RS316 multi-piece build: lip 0.5", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS316 came from and how it is built is on the BBS RS page.

Specifications

BBS RS316 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3165x114.3178.539670.5"7.5"Mitsubishi GTO—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models