BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS317

  • Size7.5x16"
  • PCD5x114.3
  • OffsetET35
  • Centre bore73 mm
  • Lip0.5"
  • Barrel6.5"

The BBS RS317 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 7.5J x 16 and is listed for Nissan Cedric.

On the BBS RS317, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 73 mm centre bore decides whether you need hub-centric rings.

ET35 is a high offset for the BBS RS317, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.

Before fitting a 16-inch BBS RS317, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

BBS RS317 multi-piece build: lip 0.5", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS317, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS317 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3175x114.3167.535730.5"6.5"Nissan Cedric—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models