BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS318

  • Size8.5x16"
  • PCD5x114.3
  • OffsetET35
  • Centre bore73 mm
  • Lip1"
  • Barrel7"

This page covers the BBS RS318, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 16-inch wheel, 8.5 inches wide and is listed for Nissan Cedric HA.

On the BBS RS318, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 73 mm centre bore decides whether you need hub-centric rings.

ET35 is a high offset for the BBS RS318, so it tucks well inside the arch, as front-drive and most modern cars need. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.

Before fitting a 16-inch BBS RS318, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS RS318: lip 1", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS318, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS318 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3185x114.3168.535731"7"Nissan Cedric HA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models