BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS319

  • Size7.5x15"
  • PCD4x100
  • OffsetET32
  • Centre bore54 mm
  • Lip1 1/8"
  • Barrel6"

The BBS RS319 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 15-inch wheel, 7.5 inches wide and is listed for Mazda 323.

On the BBS RS319, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 54 mm centre bore decides whether you need hub-centric rings.

An offset of ET32 puts the BBS RS319 in the usual range for European saloons of its era. A 7.5-inch rim normally takes tyres from about 195 to 235 mm wide.

At 15 inches, the BBS RS319 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS RS319 multi-piece build: lip 1 1/8", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS319, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS319 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3194x100157.532541 1/8"6"Mazda 323—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models