BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS320

  • Size8x17"
  • PCD5x114.3
  • OffsetET43
  • Centre bore60 mm
  • Lip0.5"
  • Barrel7"

This page covers the BBS RS320, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 17-inch wheel, 8 inches wide and is listed for Toyota Soarer 91.

On the BBS RS320, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.

ET43 is a high offset for the BBS RS320, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.

At 17 inches, the BBS RS320 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The BBS RS320 is a multi-piece wheel, so the lip and barrel are separate parts: lip 0.5", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS320 came from and how it is built is on the BBS RS page.

Specifications

BBS RS320 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3205x114.317843600.5"7"Toyota Soarer 91—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models