BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS321

  • Size9x17"
  • PCD5x114.3
  • OffsetET40
  • Centre bore60 mm
  • Lip1"
  • Barrel7.5"

This page covers the BBS RS321, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 17-inch wheel, 9 inches wide and is listed for Toyota Soarer 91.

On the BBS RS321, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.

At ET40 the BBS RS321 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

Before fitting a 17-inch BBS RS321, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS RS321: lip 1", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS321 and its siblings, their construction and buying tips.

Specifications

BBS RS321 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3215x114.317940601"7.5"Toyota Soarer 91—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models