
BBS RS series
BBS RS325
- Size7.5x16"
- PCD5x114.3
- OffsetET30
- Centre bore59.6 mm
- Lip1.5"
- Barrel5.5"
BBS RS325 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 7.5x16 inches and is listed for Ford Probe, Mazda 626, RX7.
On the BBS RS325, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 59.6 mm centre bore decides whether you need hub-centric rings.
An offset of ET30 puts the BBS RS325 in the usual range for European saloons of its era. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.
Before fitting a 16-inch BBS RS325, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
BBS RS325 multi-piece build: lip 1.5", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS325 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS325 | 5x114.3 | 16 | 7.5 | 30 | 59.6 | 1.5" | 5.5" | Ford Probe, Mazda 626, RX7 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit