
BBS RS series
BBS RS326
- Size7.5x16"
- PCD4x114.3
- OffsetET35
- Centre bore66 mm
- Lip1"
- Barrel6"
This page covers the BBS RS326, one wheel from the classic three-piece RS family. It measures 7.5x16 inches and is listed for Nissan 200 SX, Primera.
The 4x114.3 bolt pattern of the BBS RS326 is the one used by older Nissan and Mitsubishi; the 66 mm centre bore decides whether you need hub-centric rings.
At ET35 the BBS RS326 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 7.5-inch rim normally takes tyres from about 195 to 235 mm wide.
At 16 inches, the BBS RS326 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
BBS RS326 multi-piece build: lip 1", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS326 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS326 | 4x114.3 | 16 | 7.5 | 35 | 66 | 1" | 6" | Nissan 200 SX, Primera | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit