BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS327

  • Size7x16"
  • PCD5x114.3
  • OffsetET50
  • Centre bore70 mm
  • Lip0.5"
  • Barrel6"

BBS RS327 is a part number from the classic three-piece RS family. Size is 7J x 16 and is listed for Honda Legend 91.

On the BBS RS327, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 70 mm centre bore decides whether you need hub-centric rings.

At ET50 the BBS RS327 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.

Before fitting a 16-inch BBS RS327, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

BBS RS327 multi-piece build: lip 0.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS327 came from and how it is built is on the BBS RS page.

Specifications

BBS RS327 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3275x114.316750700.5"6"Honda Legend 91—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models