
BBS RS series
BBS RS330
- Size9x17"
- PCD5x114.3
- OffsetET40
- Centre bore66 mm
- Lip1"
- Barrel7.5"
The BBS RS330 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 17-inch wheel, 9 inches wide and is listed for Nissan Cedric Hard Top 91 HA.
The 5x114.3 bolt pattern of the BBS RS330 is the one used by many Japanese and Korean cars; the 66 mm centre bore decides whether you need hub-centric rings.
At ET40 the BBS RS330 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.
Before fitting a 17-inch BBS RS330, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS RS330 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS330, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS330 | 5x114.3 | 17 | 9 | 40 | 66 | 1" | 7.5" | Nissan Cedric Hard Top 91 HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit