BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS331

  • Size8x17"
  • PCD5x114.3
  • OffsetET35
  • Centre bore60 mm
  • Lip1"
  • Barrel6.5"

BBS RS331 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 17-inch wheel, 8 inches wide and is listed for Toyota Lexus 400.

On the BBS RS331, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.

ET35 is a high offset for the BBS RS331, so it tucks well inside the arch, as front-drive and most modern cars need. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

At 17 inches, the BBS RS331 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS RS331 multi-piece build: lip 1", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

Note on record: "Postert" center.

The BBS RS overview covers the background of the BBS RS331 and its siblings, their construction and buying tips.

Specifications

BBS RS331 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3315x114.317835601"6.5"Toyota Lexus 400"Postert" center

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models