
BBS RS series
BBS RS335
- Size8.5x17"
- PCD5x114.3
- OffsetET32
- Centre bore66 mm
- Lip1"
- Barrel7"
BBS RS335 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 17-inch wheel, 8.5 inches wide and is listed for Nissan 300 ZX.
On the BBS RS335, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 66 mm centre bore decides whether you need hub-centric rings.
The BBS RS335 uses ET32, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.
Before fitting a 17-inch BBS RS335, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RS335: lip 1", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS335 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS335 | 5x114.3 | 17 | 8.5 | 32 | 66 | 1" | 7" | Nissan 300 ZX | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit