BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS336

  • Size7x17"
  • PCD5x114.3
  • OffsetET40
  • Centre bore67 mm
  • Lip0.5"
  • Barrel6"

The BBS RS336 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 17-inch wheel, 7 inches wide and is listed for Mazda Sentia, Mitsubishi Diamante.

On the BBS RS336, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 67 mm centre bore decides whether you need hub-centric rings.

ET40 is a high offset for the BBS RS336, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.

At 17 inches, the BBS RS336 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS RS336 multi-piece build: lip 0.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS336 came from and how it is built is on the BBS RS page.

Specifications

BBS RS336 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3365x114.317740670.5"6"Mazda Sentia, Mitsubishi Diamante—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models