BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS338

  • Size9x17"
  • PCD5x114.3
  • OffsetET40
  • Centre bore67 mm
  • Lip1"
  • Barrel7.5"

BBS RS338 is a part number from the classic three-piece RS family. It measures 9x17 inches and is listed for Mazda RX7 91 HA.

On the BBS RS338, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 67 mm centre bore decides whether you need hub-centric rings.

At ET40 the BBS RS338 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.

At 17 inches, the BBS RS338 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS338: lip 1", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS338 came from and how it is built is on the BBS RS page.

Specifications

BBS RS338 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3385x114.317940671"7.5"Mazda RX7 91 HA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models