
BBS RS series
BBS RS339
- Size8x17"
- PCD5x114.3
- OffsetET25
- Centre bore66 mm
- Lip1"
- Barrel6.5"
This page covers the BBS RS339, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 8x17 inches and is listed for Nissan Cima 91.
The 5x114.3 bolt pattern of the BBS RS339 is the one used by many Japanese and Korean cars; the 66 mm centre bore decides whether you need hub-centric rings.
An offset of ET25 puts the BBS RS339 in the usual range for European saloons of its era. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
At 17 inches, the BBS RS339 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS RS339 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS339 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS339 | 5x114.3 | 17 | 8 | 25 | 66 | 1" | 6.5" | Nissan Cima 91 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit