
BBS RS series
BBS RS340
- Size9x17"
- PCD5x114.3
- OffsetET25
- Centre bore66 mm
- Lip1.5"
- Barrel7"
This page covers the BBS RS340, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 17-inch wheel, 9 inches wide and is listed for Nissan Cima 91 HA.
The 5x114.3 bolt pattern of the BBS RS340 is the one used by many Japanese and Korean cars; the 66 mm centre bore decides whether you need hub-centric rings.
The BBS RS340 uses ET25, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
Before fitting a 17-inch BBS RS340, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
BBS RS340 multi-piece build: lip 1.5", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS340 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS340 | 5x114.3 | 17 | 9 | 25 | 66 | 1.5" | 7" | Nissan Cima 91 HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit