BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS341

  • Size6.5x15"
  • PCD4x100
  • OffsetET30
  • Centre bore57 mm
  • Lip5/8"
  • Barrel5 3/8"

This page covers the BBS RS341, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 15-inch wheel, 6.5 inches wide and is listed for Daewoo Royale 91.

The 4x100 bolt pattern of the BBS RS341 is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.

An offset of ET30 puts the BBS RS341 in the usual range for European saloons of its era. A 6.5-inch rim normally takes tyres from about 165 to 215 mm wide.

Before fitting a 15-inch BBS RS341, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS341 is a multi-piece wheel, so the lip and barrel are separate parts: lip 5/8", barrel 5 3/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS341 and its siblings, their construction and buying tips.

Specifications

BBS RS341 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3414x100156.530575/8"5 3/8"Daewoo Royale 91—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models