BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS348

  • Size7.5x16"
  • PCD5x114.3
  • OffsetET38
  • Centre bore60 mm
  • Lip1"
  • Barrel6"

BBS RS348 is a part number from the classic three-piece RS family. Size is 7.5J x 16.

On the BBS RS348, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.

At ET38 the BBS RS348 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.

At 16 inches, the BBS RS348 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The BBS RS348 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The fitment of the BBS RS348 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS RS348 came from and how it is built is on the BBS RS page.

Specifications

BBS RS348 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3485x114.3167.538601"6"——

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models