
BBS RS series
BBS RS349
- Size8.5x16"
- PCD5x114.3
- OffsetET38
- Centre bore60 mm
- Lip1"
- Barrel7"
BBS RS349 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 8.5x16 inches.
The 5x114.3 bolt pattern of the BBS RS349 is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.
At ET38 the BBS RS349 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.
At 16 inches, the BBS RS349 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS RS349 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The fitment of the BBS RS349 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
For the history behind the BBS RS349, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS349 | 5x114.3 | 16 | 8.5 | 38 | 60 | 1" | 7" | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit