
BBS RS series
BBS RS353
- Size9.5x17"
- PCD5x114.3
- OffsetET45
- Centre bore60 mm
- Lip1.5"
- Barrel7.5"
The BBS RS353 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 9.5x17 inches.
On the BBS RS353, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.
At ET45 the BBS RS353 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 245-285 mm are the usual match for a 9.5-inch rim.
At 17 inches, the BBS RS353 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
BBS RS353 multi-piece build: lip 1.5", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The fitment of the BBS RS353 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
More on where the BBS RS353 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS353 | 5x114.3 | 17 | 9.5 | 45 | 60 | 1.5" | 7.5" | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit