BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS352

  • Size8.5x17"
  • PCD5x114.3
  • OffsetET33
  • Centre bore60 mm
  • Lip1"
  • Barrel7"

The BBS RS352 belongs to the classic three-piece RS family. Size is 8.5J x 17.

On the BBS RS352, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.

The BBS RS352 uses ET33, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.

At 17 inches, the BBS RS352 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS352: lip 1", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

No fitment figure is recorded for the BBS RS352. Read the markings on the back of the wheel before relying on it.

For the history behind the BBS RS352, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS352 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3525x114.3178.533601"7"——

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models