BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS351

  • Size8.5x17"
  • PCD5x114.3
  • OffsetET48
  • Centre bore60 mm
  • Lip1"
  • Barrel7"

BBS RS351 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 8.5x17 inches.

On the BBS RS351, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.

ET48 is a high offset for the BBS RS351, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.

Before fitting a 17-inch BBS RS351, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

BBS RS351 multi-piece build: lip 1", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

No fitment figure is recorded for the BBS RS351. Read the markings on the back of the wheel before relying on it.

For the history behind the BBS RS351, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS351 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3515x114.3178.548601"7"——

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models