BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS357

  • Size8x17"
  • PCD5x114.3
  • OffsetET39
  • Lip0.5"
  • Barrel7"

This page covers the BBS RS357, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 8x17 inches.

On the BBS RS357, the 5x114.3 PCD is the one used by many Japanese and Korean cars.

At ET39 the BBS RS357 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.

At 17 inches, the BBS RS357 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS357: lip 0.5", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The centre bore and fitment of the BBS RS357 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

The BBS RS overview covers the background of the BBS RS357 and its siblings, their construction and buying tips.

Specifications

BBS RS357 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3575x114.317839—0.5"7"——

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models