BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS358

  • Size8x17"
  • PCD5x114.3
  • OffsetET40
  • Lip1"
  • Barrel6.5"

The BBS RS358 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 17-inch wheel, 8 inches wide.

On the BBS RS358, the 5x114.3 PCD is the one used by many Japanese and Korean cars.

ET40 is a high offset for the BBS RS358, so it tucks well inside the arch, as front-drive and most modern cars need. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

At 17 inches, the BBS RS358 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The BBS RS358 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

No centre bore or fitment figure is recorded for the BBS RS358. Read the markings on the back of the wheel before relying on it.

For the history behind the BBS RS358, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS358 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3585x114.317840—1"6.5"——

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models