
BBS RSII series
BBS RS702
- Size8x17"
- PCD5x112
- OffsetET35
BBS RS702 is a part number from the RS II, the two-piece successor to the original RS. It measures 8x17 inches and is listed for vag.
The 5x112 bolt pattern of the BBS RS702 is the one used by Audi, VW, Mercedes-Benz and later BMW.
ET35 is a high offset for the BBS RS702, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
Before fitting a 17-inch BBS RS702, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The centre bore of the BBS RS702 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
The BBS RSII overview covers the background of the BBS RS702 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS702 | 5x112 | 17 | 8 | 35 | — | — | — | vag | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit