BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS701

  • Size10x18"
  • PCD5x120
  • OffsetET25

BBS RS701 is a part number from the RS II family of two-piece mesh wheels. Size is 10J x 18 and is listed for BMW.

The 5x120 bolt pattern of the BBS RS701 is the one used by BMW and some Land Rover and Honda.

The BBS RS701 uses ET25, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 255-295 mm are the usual match for a 10-inch rim.

Before fitting an 18-inch BBS RS701, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Note on record: deep concave.

The centre bore of the BBS RS701 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS RS701 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS701 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7015x120181025———BMWdeep concave

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models