
BBS RSII series
BBS RS704
- Size8.5x18"
- PCD5x112
- OffsetET22
The BBS RS704 belongs to the RS II, the two-piece successor to the original RS. Size is 8.5J x 18.
On the BBS RS704, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW.
The BBS RS704 uses ET22, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.
At 18 inches, the BBS RS704 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The centre bore and fitment of the BBS RS704 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
The BBS RSII overview covers the background of the BBS RS704 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS704 | 5x112 | 18 | 8.5 | 22 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit