BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS705

  • Size10x18"
  • PCD5x112
  • OffsetET20

This page covers the BBS RS705, one wheel from the RS II, the two-piece successor to the original RS. Size is 10J x 18.

On the BBS RS705, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW.

An offset of ET20 puts the BBS RS705 in the usual range for European saloons of its era. Tyre widths of roughly 255-295 mm are the usual match for a 10-inch rim.

At 18 inches, the BBS RS705 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The centre bore and fitment of the BBS RS705 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS RS705, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS705 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7055x112181020—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models