BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS707

  • Size10x18"
  • PCD5x130
  • OffsetET50

The BBS RS707 belongs to the RS II, the two-piece successor to the original RS. It is an 18-inch wheel, 10 inches wide and is listed for Porsche 993, turbo.

On the BBS RS707, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz.

ET50 is a high offset for the BBS RS707, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 255-295 mm are the usual match for a 10-inch rim.

Before fitting an 18-inch BBS RS707, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

No centre bore figure is recorded for the BBS RS707. Read the markings on the back of the wheel before relying on it.

More on where the BBS RS707 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS707 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7075x130181050———Porsche 993, turbo—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models