BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS708

  • Size9x20"
  • PCD5x120
  • OffsetET22

This page covers the BBS RS708, one wheel from the RS II family of two-piece mesh wheels. It measures 9x20 inches and is listed for BMW.

The 5x120 bolt pattern of the BBS RS708 is the one used by BMW and some Land Rover and Honda.

An offset of ET22 puts the BBS RS708 in the usual range for European saloons of its era. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.

At 20 inches, the BBS RS708 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The centre bore of the BBS RS708 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

The BBS RSII overview covers the background of the BBS RS708 and its siblings, their construction and buying tips.

Specifications

BBS RS708 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7085x12020922———BMW—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models