BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS709

  • Size10x20"
  • PCD5x120
  • OffsetET25

The BBS RS709 belongs to the RS II, the two-piece successor to the original RS. Size is 10J x 20 and is listed for BMW.

The 5x120 bolt pattern of the BBS RS709 is the one used by BMW and some Land Rover and Honda.

The BBS RS709 uses ET25, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.

At 20 inches, the BBS RS709 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

No centre bore figure is recorded for the BBS RS709. Read the markings on the back of the wheel before relying on it.

The BBS RSII overview covers the background of the BBS RS709 and its siblings, their construction and buying tips.

Specifications

BBS RS709 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7095x120201025———BMW—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models