BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS710

  • Size8.5x18"
  • PCD5x112
  • OffsetET32

BBS RS710 is a part number from the RS II family of two-piece mesh wheels. Size is 8.5J x 18 and is listed for vag.

On the BBS RS710, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW.

The BBS RS710 uses ET32, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.

Before fitting an 18-inch BBS RS710, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

No centre bore figure is recorded for the BBS RS710. Read the markings on the back of the wheel before relying on it.

For the history behind the BBS RS710, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS710 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7105x112188.532———vag—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models