
BBS RSII series
BBS RS719
- Size8.5x18"
- PCD5x120.65
- OffsetET28
- Centre bore73.9 mm
This page covers the BBS RS719, one wheel from the RS II range, which kept the mesh look of the RS on a two-piece construction. It is an 18-inch wheel, 8.5 inches wide and is listed for Jaguar XJ, XJ-R.
On the BBS RS719, the 5x120.65 PCD is the one used by Chevrolet Corvette and Camaro; the 73.9 mm centre bore decides whether you need hub-centric rings.
The BBS RS719 uses ET28, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.
At 18 inches, the BBS RS719 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
For the history behind the BBS RS719, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS719 | 5x120.65 | 18 | 8.5 | 28 | 73.9 | — | — | Jaguar XJ, XJ-R | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit