BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS718

  • Size10x18"
  • PCD5x114.3
  • OffsetET45

This page covers the BBS RS718, one wheel from the RS II family of two-piece mesh wheels. Size is 10J x 18.

The 5x114.3 bolt pattern of the BBS RS718 is the one used by many Japanese and Korean cars.

ET45 is a high offset for the BBS RS718, so it tucks well inside the arch, as front-drive and most modern cars need. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.

Before fitting an 18-inch BBS RS718, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The centre bore and fitment of the BBS RS718 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS RS718 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS718 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7185x114.3181045—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models