BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS717

  • Size8.5x18"
  • PCD5x114.3
  • OffsetET40

BBS RS717 is a part number from the RS II, the two-piece successor to the original RS. Size is 8.5J x 18.

The 5x114.3 bolt pattern of the BBS RS717 is the one used by many Japanese and Korean cars.

At ET40 the BBS RS717 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.

Before fitting an 18-inch BBS RS717, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The centre bore and fitment of the BBS RS717 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS RS717 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS717 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7175x114.3188.540—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models