
BBS RSII series
BBS RS716
- Size7x17"
- PCD4x114.3
- OffsetET40
The BBS RS716 belongs to the RS II family of two-piece mesh wheels. It measures 7x17 inches.
The 4x114.3 bolt pattern of the BBS RS716 is the one used by older Nissan and Mitsubishi.
ET40 is a high offset for the BBS RS716, so it tucks well inside the arch, as front-drive and most modern cars need. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
At 17 inches, the BBS RS716 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
No centre bore or fitment figure is recorded for the BBS RS716. Read the markings on the back of the wheel before relying on it.
More on where the BBS RS716 came from and how it is built is on the BBS RSII page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS716 | 4x114.3 | 17 | 7 | 40 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit