
BBS RSII series
BBS RS715
- Size7x17"
- PCD4x100
- OffsetET35
The BBS RS715 belongs to the RS II, the two-piece successor to the original RS. It measures 7x17 inches.
The 4x100 bolt pattern of the BBS RS715 is the one used by older BMW, VW, Honda and Mazda.
ET35 is a high offset for the BBS RS715, so it tucks well inside the arch, as front-drive and most modern cars need. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
Before fitting a 17-inch BBS RS715, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
No centre bore or fitment figure is recorded for the BBS RS715. Read the markings on the back of the wheel before relying on it.
The BBS RSII overview covers the background of the BBS RS715 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS715 | 4x100 | 17 | 7 | 35 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit