
BBS RSII series
BBS RS714
- Size8.5x18"
- PCD5x120
- OffsetET38
- Centre bore72.5 mm
This page covers the BBS RS714, one wheel from the RS II family of two-piece mesh wheels. Size is 8.5J x 18 and is listed for BMW e36, Z3.
The 5x120 bolt pattern of the BBS RS714 is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.
ET38 is a high offset for the BBS RS714, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.
Before fitting an 18-inch BBS RS714, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS RSII overview covers the background of the BBS RS714 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS714 | 5x120 | 18 | 8.5 | 38 | 72.5 | — | — | BMW e36, Z3 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit