BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS713

  • Size8x17"
  • PCD5x120
  • OffsetET15
  • Centre bore72.5 mm

BBS RS713 is a part number from the RS II, the two-piece successor to the original RS. It measures 8x17 inches and is listed for BMW E34,E24,E31,E32,E38.

The 5x120 bolt pattern of the BBS RS713 is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

An offset of ET15 puts the BBS RS713 in the usual range for European saloons of its era. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

Before fitting a 17-inch BBS RS713, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

For the history behind the BBS RS713, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS713 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7135x1201781572.5——BMW E34,E24,E31,E32,E38—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models