
BBS RSII series
BBS RS712
- Size8x17"
- PCD5x114.3
- OffsetET38
The BBS RS712 belongs to the RS II range, which kept the mesh look of the RS on a two-piece construction. It is a 17-inch wheel, 8 inches wide.
On the BBS RS712, the 5x114.3 PCD is the one used by many Japanese and Korean cars.
ET38 is a high offset for the BBS RS712, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
At 17 inches, the BBS RS712 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The centre bore and fitment of the BBS RS712 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
The BBS RSII overview covers the background of the BBS RS712 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS712 | 5x114.3 | 17 | 8 | 38 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit