
BBS RSII series
BBS RS721
- Size10x18"
- PCD5x130
- OffsetET65
This page covers the BBS RS721, one wheel from the RS II, the two-piece successor to the original RS. Size is 10J x 18 and is listed for Porsche 991, 993, 996, 964.
On the BBS RS721, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz.
ET65 is a high offset for the BBS RS721, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 255-295 mm are the usual match for a 10-inch rim.
Before fitting an 18-inch BBS RS721, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The centre bore of the BBS RS721 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
The BBS RSII overview covers the background of the BBS RS721 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS721 | 5x130 | 18 | 10 | 65 | — | — | — | Porsche 991, 993, 996, 964 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit