
BBS RSII series
BBS RS722
- Size7x16"
- PCD5x100
- OffsetET43
- Centre bore57 mm
BBS RS722 is a part number from the RS II family of two-piece mesh wheels. It measures 7x16 inches.
The 5x100 bolt pattern of the BBS RS722 is the one used by VW Group, Subaru and Toyota; the 57 mm centre bore decides whether you need hub-centric rings.
At ET43 the BBS RS722 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
At 16 inches, the BBS RS722 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The fitment of the BBS RS722 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
More on where the BBS RS722 came from and how it is built is on the BBS RSII page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS722 | 5x100 | 16 | 7 | 43 | 57 | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit