BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS723

  • Size7.5x17"
  • PCD5x120
  • OffsetET41
  • Centre bore72.5 mm

BBS RS723 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. Size is 7.5J x 17 and is listed for BMW e36, Z3.

On the BBS RS723, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

At ET41 the BBS RS723 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.

At 17 inches, the BBS RS723 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Note on record: 42 style BMW.

More on where the BBS RS723 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS723 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7235x120177.54172.5——BMW e36, Z342 style BMW

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models