BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS724

  • Size8.5x17"
  • PCD5x120
  • OffsetET41
  • Centre bore72.5 mm

BBS RS724 is a part number from the RS II, the two-piece successor to the original RS. It measures 8.5x17 inches and is listed for BMW e36, Z3.

On the BBS RS724, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

At ET41 the BBS RS724 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.

At 17 inches, the BBS RS724 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Note on record: 42 style BMW.

More on where the BBS RS724 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS724 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7245x120178.54172.5——BMW e36, Z342 style BMW

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models