BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS731

  • Size8x17"
  • PCD5x114.3
  • OffsetET42
  • Centre bore73 mm

BBS RS731 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. It is a 17-inch wheel, 8 inches wide.

On the BBS RS731, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 73 mm centre bore decides whether you need hub-centric rings.

At ET42 the BBS RS731 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

At 17 inches, the BBS RS731 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Note on record: stern.

The fitment of the BBS RS731 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS RS731, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS731 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7315x114.31784273———stern

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models