
BBS RSII series
BBS RS730
- Size7x17"
- PCD5x114.3
- OffsetET35
- Centre bore73 mm
The BBS RS730 belongs to the RS II family of two-piece mesh wheels. It is a 17-inch wheel, 7 inches wide.
The 5x114.3 bolt pattern of the BBS RS730 is the one used by many Japanese and Korean cars; the 73 mm centre bore decides whether you need hub-centric rings.
ET35 is a high offset for the BBS RS730, so it tucks well inside the arch, as front-drive and most modern cars need. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
Before fitting a 17-inch BBS RS730, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Note on record: stern.
The fitment of the BBS RS730 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
More on where the BBS RS730 came from and how it is built is on the BBS RSII page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS730 | 5x114.3 | 17 | 7 | 35 | 73 | — | — | — | stern |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit