BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS729

  • Size7x17"
  • PCD5x114.3
  • OffsetET42
  • Centre bore73 mm

The BBS RS729 belongs to the RS II family of two-piece mesh wheels. Size is 7J x 17.

The 5x114.3 bolt pattern of the BBS RS729 is the one used by many Japanese and Korean cars; the 73 mm centre bore decides whether you need hub-centric rings.

ET42 is a high offset for the BBS RS729, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.

Before fitting a 17-inch BBS RS729, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Note on record: stern.

The fitment of the BBS RS729 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS RS729 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS729 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7295x114.31774273———stern

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models