BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS728

  • Size9x18"
  • PCD5x114.3
  • OffsetET35

The BBS RS728 belongs to the RS II range, which kept the mesh look of the RS on a two-piece construction. Size is 9J x 18.

On the BBS RS728, the 5x114.3 PCD is the one used by many Japanese and Korean cars.

At ET35 the BBS RS728 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.

At 18 inches, the BBS RS728 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

No centre bore or fitment figure is recorded for the BBS RS728. Read the markings on the back of the wheel before relying on it.

The BBS RSII overview covers the background of the BBS RS728 and its siblings, their construction and buying tips.

Specifications

BBS RS728 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7285x114.318935—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models