
BBS RSII series
BBS RS727
- Size8x18"
- PCD5x114.3
- OffsetET35
The BBS RS727 belongs to the RS II, the two-piece successor to the original RS. It measures 8x18 inches.
On the BBS RS727, the 5x114.3 PCD is the one used by many Japanese and Korean cars.
ET35 is a high offset for the BBS RS727, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
Before fitting an 18-inch BBS RS727, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
No centre bore or fitment figure is recorded for the BBS RS727. Read the markings on the back of the wheel before relying on it.
The BBS RSII overview covers the background of the BBS RS727 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS727 | 5x114.3 | 18 | 8 | 35 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit