BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS726

  • Size9x18"
  • PCD5x114.3
  • OffsetET45

This page covers the BBS RS726, one wheel from the RS II family of two-piece mesh wheels. It is an 18-inch wheel, 9 inches wide.

The 5x114.3 bolt pattern of the BBS RS726 is the one used by many Japanese and Korean cars.

At ET45 the BBS RS726 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

Before fitting an 18-inch BBS RS726, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

No centre bore or fitment figure is recorded for the BBS RS726. Read the markings on the back of the wheel before relying on it.

More on where the BBS RS726 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS726 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7265x114.318945—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models